Newborns' immune system is imperfect, their anti-bacterial ability is poor, and they are easy to be infected. The tableware for feeding often has milk residue. Milk is a nutrient-rich substance that is easy to breed bacteria, so it needs to be cleaned and disinfected promptly and thoroughly. . Prevent people from getting sick from the mouth.

1. Clean the milk bottle immediately after each feeding. Pour out the remaining milk first, rinse with clean water and then use a bottle brush to clean the bottle. It is best to prepare a bottle cleaner specifically for cleaning. In addition to the inside of the bottle, the bottleneck and screw should also be carefully cleaned, so as not to miss.

2. When cleaning the pacifier, first turn the pacifier over and carefully clean it with a pacifier brush. If there are solidified milk stains on the nipple, you can soak it in hot water for a while, and then brush it off with a nipple brush after the milk stains become soft. The place near the nipple hole is relatively thin, so the action should be light when cleaning, and be careful not to crack it.

3. After washing the pacifiers and baby bottles, they should be rinsed with running water repeatedly, and they should be dried upside down in a ventilated place.

4. In addition to cleaning every time it is used up, regular disinfection is also required. It is best to disinfect once a day. It can be boiled in ordinary pot with boiling water, or steamed in a steamer, or in a microwave oven, usually 8-10 minutes That's it. Sterilizers should be dedicated, or a dedicated sterilizer can be used.

5. Prepare a special sterilization pot, put it in the milk bottle (at this time, put it in the glass bottle, the plastic bottle should be placed in the pot after the water has boiled for 5-10 minutes), and fill it with an appropriate amount of water (to completely submerge all the milk) With a degree), bring to a boil on high heat, put in pacifiers, bottle caps and other plastic products after 5-10 minutes, close the lid and cook for 3-5 minutes before turning off the heat. After the water cools slightly, use a sterilized bottle holder to take out the nipple and bottle cap, dry them, and put them on the round bottle for later use.

6. Put the thoroughly cleaned feeding bottle and the nipple mouth down into the steamer to steam for about 5 minutes, then take it out and let it cool.

7. After daily cleaning, tableware and other articles will inevitably have residual bacteria or be contaminated by bacteria in the air to breed on tableware and other articles. In a damp baby bottle, bacteria are more likely to grow on the surface of the nipple. If this happens for a long time, it will pose a serious threat to the baby's health. Infants and young children have weak immunity. In order to provide safe and clean feeding equipment for your baby, you need to sterilize the feeding bottle and other auxiliary equipment at high temperature.